Registrieren Sie sich für das Dlubal-Extranet, um die Software optimal nutzen zu lassen und ausschließlichen Zugriff auf Ihre persönlichen Daten zu haben.
A simply supported beam is loaded by pure bending. Aufgrund des Biegeknickens versuchen Sie die Verzweigungslast und den zugehörigen Lastfaktor zu ermitteln.
A strut with a circular cross-section is supported according to four basic cases of Euler buckling and subjected to pressure force. Ermitteln Sie die Verzweigungslast.
Berücksichtigen Sie die im Bild Nr.1 dargestellte Stabspannweite ASTM A992 W 18 × 50 und die gleichmäßigen Eigen- und Nutzlasten. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
A thin rectangular orthotropic plate is simply supported and loaded by uniformly distributed pressure. The directions of axes x and y coincide with the principal directions. Bestimmen Sie maximale Durchbiegung der Platte, ohne das Eigengewicht dabei zu berücksichtigen.
Ein Zweimassensystem besteht aus zwei Schäften und zwei Massen, die durch die entsprechenden Trägheitsmomente dargestellt werden, die in einem gegebenen Abstand als Knotenmassen konzentriert sind. The left shaft is fixed, and the right mass is free. Neglecting the self‑weight of the shafts, determine the torsional natural frequencies of the system.
A cantilever is loaded by a transversal and an axial force on the right end and is fully fixed on the left end. Das Problem wird durch folgenden Parametersatz beschrieben. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
A structure made of an I-profile is fully fixed on the left end and embedded into the sliding support on the right end. Die Struktur besteht aus zwei Segmenten. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Bestimmen Sie die maximale Durchbiegung des Kragarms aus zwei Glasscheiben und einer dazwischenliegenden Folienschicht. The plate is fully fixed at one end and subjected to uniform pressure.
Eine Struktur aus Stäben mit I-Profilen wird an beiden Enden durch gleitende Federstützen gelagert und durch Transversalkräfte belastet. The self-weight is neglected in this example. Determine the deflection of the structure, the bending moment, the normal force in the given test points, and the horizontal deflection of the spring supports.
A beam is fully fixed (warping is restricted) on the left end and supported by a fork support (warping is enabled) on the right end. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. Dieses Verifikationsbeispiel basiert auf dem von Gensichen und Lumpe vorgestellten Beispiel.
Ein I-Profil-Kragträger ist am linken Ende gelagert und durch Moment belastet. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
A steel cantilever with a rectangular cross‑section is fully fixed on one side and free on the other. Das Ziel von diesem Verifizierungsbeispiel ist, die Eigenfrequenzen der Struktur zu ermitteln.
Es soll die maximalen Durchbiegungen des Blockes unter Berücksichtigung bzw. Vernachlässigung der Schubwirkung ermittelt werden. The square block of the isotropic material is fully fixed at one end and loaded with uniform vertical pressure.
Weisen Sie nach, dass die Ergebnisse durch die Kopplung unterschiedlicher dimensionaler Elemente nicht beeinflusst werden. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.