To start the export from Revit to RFEM, use the
Export Model button in the Revit ribbon (see the image
Add-in in Revit Ribbon
).
A dialog box appears where you can enter the specifications important for the data transfer to RFEM. The dialog box consists of two tabs.
General Settings
In the "General Settings" tab, you can define the main specifications for the data export.
Z-Direction
Here, you can specify the orientation of the global Z-axis in an RFEM model.
RFEM
Select whether you want to Create new model or Overwrite existing model for the export to RFEM.
In the case of a newly created model, you can navigate to a model template in RFEM. For this, you need to specify the file path of an RFEM model template (an *.ft6 file).
Model Type
When modeling in Revit, physical elements are created in general. The export to RFEM requires an analytical model. You can automatically generate the analytical calculation model in Revit. Using the model type, you can specify whether the analytical and/or physical properties are exported.
If you export an analytical model, all objects with an analytical model stored are transferred. Analytical elements without an associated physical element are also exported. The material and cross-section information is read out of the analytical elements. Eccentricities from physical properties are not transferred.
If you export a physical model, only the analytical objects linked to a physical element are transferred. The material and cross-section information is read out of the physical elements. This way, you can also consider the eccentricities from the physical model.
If you export the analytical and physical model, the same elements are transferred as in the case of exporting the analytical model; the only difference is that the material and cross-section information are transferred from the physical model for all analytical elements linked to this physical model. This way, you can also consider the eccentricities from the physical model.
Objects to Transfer
This section provides the option to export a partial structure only. You can control the objects to be transferred in Revit using selections or visibilities.
The "Only members and surfaces" option allows you to export only the main objects (beams, columns, slabs). Joints or support definitions are not taken into account. Any incomplete or incorrect definition in Revit will be ignored.
Options
The options Consider member eccentricities and Consider surface eccentricities allow you to control whether to automatically generate eccentricities in the RFEM model. They result from the offset of the analytical line or surface to the center of gravity of the physical object in Revit.
If you Export member hinges without degrees of freedom, RFEM creates "empty" hinges on all RFEM members that do not get any specific hinge information from Revit. Thus, the members are rigidly connected.
Apply the Use cross-section name from "Dlubal name" parameter option to convert the cross-section using the defined Dlubal parameters.
Add name to comment documents the material or cross-section names used in Revit in the associated RFEM comments.
Structural Settings
In the Structural Settings tab, you can specify how to transfer the foundation objects from Revit to RFEM.
Foundations
In RFEM, there are no specific foundation objects, only simple supports. The objects of the "single foundation" or "wall foundation" type can be created in RFEM either as hinged nodal supports or line supports, or as surfaces with elastic foundation.
Spring stiffnesses of an elastic foundation are preset with standard values. Adjust the values in the RFEM model. The surface dimensions are also preset, and usually have to be compared with the geometric conditions.
Loads
If you activate the structural setting Loads , the concentrated loads, line loads, and surface loads defined in Revit are exported to RFEM.
Ebenso werden die Lastfälle aus Revit übertragen, sowie die Einwirkungsgruppen in die entsprechenden Einwirkungskategorien in RFEM konvertiert.
